PXC搭建问题有哪些
本篇文章给大家分享的是有关PXC搭建问题有哪些，小编觉得挺实用的，因此分享给大家学习，希望大家阅读完这篇文章后可以有所收获，话不多说，跟着小编一起来看看吧。
企业建站必须是能够以充分展现企业形象为主要目的，是企业文化与产品对外扩展宣传的重要窗口，一个合格的网站不仅仅能为公司带来巨大的互联网上的收集和信息发布平台，创新互联建站面向各种领域：宣传片制作等成都网站设计、网络营销推广解决方案、网站设计等建站排名服务。
无法启动第一个节点
2017-11-18T15:53:00.732400Z 0 [Note] WSREP: gcomm: connecting to group 'zrz', peer '192.168.1.101:'
2017-11-18T15:53:00.733049Z 0 [Note] WSREP: (8dec793b, 'tcp://0.0.0.0:4567') connection established to 8dec793b tcp://192.168.1.101:4567
2017-11-18T15:53:00.733073Z 0 [Warning] WSREP: (8dec793b, 'tcp://0.0.0.0:4567') address 'tcp://192.168.1.101:4567' points to own listening address, blacklisting
2017-11-18T15:53:03.733022Z 0 [Note] WSREP: (8dec793b, 'tcp://0.0.0.0:4567') connection to peer 8dec793b with addr tcp://192.168.1.101:4567 timed out, no messages seen in PT3S
2017-11-18T15:53:03.733131Z 0 [Warning] WSREP: no nodes coming from prim view, prim not possible
2017-11-18T15:53:03.733151Z 0 [Note] WSREP: Current view of cluster as seen by this node
view (view_id(NON_PRIM,8dec793b,1)
memb {
8dec793b,0
}
joined {
}
left {
}
partitioned {
}
)
2017-11-18T15:53:04.233267Z 0 [Warning] WSREP: last inactive check more than PT1.5S ago (PT3.50093S), skipping check
2017-11-18T15:53:33.736202Z 0 [Note] WSREP: Current view of cluster as seen by this node
view ((empty))
2017-11-18T15:53:33.736368Z 0 [ERROR] WSREP: failed to open gcomm backend connection: 110: failed to reach primary view: 110 (Connection timed out)
at gcomm/src/pc.cpp:connect():158
2017-11-18T15:53:33.736383Z 0 [ERROR] WSREP: gcs/src/gcs_core.cpp:gcs_core_open():208: Failed to open backend connection: -110 (Connection timed out)
2017-11-18T15:53:33.736618Z 0 [ERROR] WSREP: gcs/src/gcs.cpp:gcs_open():1463: Failed to open channel 'zrz' at 'gcomm://192.168.1.101': -110 (Connection timed out)
2017-11-18T15:53:33.736631Z 0 [ERROR] WSREP: gcs connect failed: Connection timed out
2017-11-18T15:53:33.736636Z 0 [ERROR] WSREP: Provider/Node (gcomm://192.168.1.101) failed to establish connection with cluster (reason: 7)
2017-11-18T15:53:33.736641Z 0 [ERROR] Aborting
2017-11-18T15:53:33.736651Z 0 [Note] Giving 0 client threads a chance to die gracefully
2017-11-18T15:53:33.736656Z 0 [Note] WSREP: Waiting for active wsrep applier to exit
2017-11-18T15:53:33.736659Z 0 [Note] WSREP: Service disconnected.
2017-11-18T15:53:33.736664Z 0 [Note] WSREP: Waiting to close threads......
2017-11-18T15:53:38.736758Z 0 [Note] WSREP: Some threads may fail to exit.
2017-11-18T15:53:38.736807Z 0 [Note] Binlog end
2017-11-18T15:53:38.737048Z 0 [Note] /usr/local/MySQL/bin/mysqld: Shutdown complete问题主要描述：错误日志提示无法成功加入节点
原因：第一个节点启动时需要指定自己为作为集群启动
解决办法:加--wsrep-new-cluster参数启动，官方指定的bootstrap-pxc参数并不生效
第二个节点无法加入
2017-11-19T15:55:29.227793Z 0 [ERROR] WSREP: Process completed with error: wsrep_sst_xtrabackup-v2 --role 'donor' --address '192.168.1.103:4444/xtrabackup_sst//1' --socket '/data/mysql/3306/tmp/mysql3306.sock' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --binlog 'mysql-bin' --gtid 'df47a753-cd3d-11e7-85b5-66f48d655632:0': 32 (Broken pipe)
2017-11-19T15:55:29.227868Z 0 [ERROR] WSREP: Command did not run: wsrep_sst_xtrabackup-v2 --role 'donor' --address '192.168.1.103:4444/xtrabackup_sst//1' --socket '/data/mysql/3306/tmp/mysql3306.sock' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --binlog 'mysql-bin' --gtid 'df47a753-cd3d-11e7-85b5-66f48d655632:0'
问题描述：无法成功传输SST在mysql/bin目录下执行wsrep_sst_xtrabackup-v2 --role 'donor' --address '192.168.1.103:4444/xtrabackup_sst//1' --socket '/data/mysql/3306/tmp/mysql3306.sock' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --binlog 'mysql-bin' --gtid 'df47a753-cd3d-11e7-85b5-66f48d655632:0'
提示：
which: no socat in (/usr/sbin:/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/usr/local/mysql/bin:/usr/local/pxc/bin:/root/bin)
原因：缺少依赖组件socat
解决办法：yum -y install socat
第二个几点无法加入
2017-11-19T15:15:11.735984Z 2 [Note] WSREP: New cluster view: global state: 50970ac2-cc82-11e7-8b90-c716227b4ac7:0, view# 8: Primary, number of nodes: 2, my index: 0, protocol version 3
2715-2017-11-19T15:15:11.735993Z 2 [Warning] WSREP: Gap in state sequence. Need state transfer.
2716-2017-11-19T15:15:11.736057Z 0 [Note] WSREP: Initiating SST/IST transfer on JOINER side (wsrep_sst_rsync --role 'joiner' --address '192.168.1.102' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --parent '3104' --binlog 'mysql-bin' )
2717:which: no lsof in (/usr/sbin:/sbin:/usr/local/Percona-XtraDB-Cluster-5.7.18-rel15-29.20.1.Linux.x86_64.ssl101/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/usr/local/mysql/bin:/root/bin)
2718-2017-11-19T15:15:11.874860Z 0 [ERROR] WSREP: Failed to read 'ready' from: wsrep_sst_rsync --role 'joiner' --address '192.168.1.102' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --parent '3104' --binlog 'mysql-bin'
2719: Read: ''lsof' not found in PATH'
2720-2017-11-19T15:15:11.874912Z 0 [ERROR] WSREP: Process completed with error: wsrep_sst_rsync --role 'joiner' --address '192.168.1.102' --datadir '/data/mysql/3306/data/' --defaults-file '/data/mysql/3306/my.cnf' --defaults-group-suffix '' --parent '3104' --binlog 'mysql-bin' : 2 (No such file or directory)
2721-2017-11-19T15:15:11.874964Z 2 [ERROR] WSREP: Failed to prepare for 'rsync' SST. Unrecoverable.
2722-2017-11-19T15:15:11.874987Z 2 [ERROR] Aborting
2723-
2724-2017-11-19T15:15:11.874993Z 2 [Note] Giving 2 client threads a chance to die gracefully
问题描述：无法传输SST原因：缺少依赖组件lsof
解决办法：yum -y install lsof
建议：1.先单机启动，更改完root账号，并创建好sst传输账号后，再启动第一个节点
2.若xtrabackup-v2传输方式总是报错，可以改用rsync，并注释掉auth行
3.第二第三个节点启动失败，可以暴力一点删掉data目录下面的文件后重新初始化
4.可以删除data目录下面g开头的两个集群信息文件重新启动进行尝试排错
5.telnet主节点的4567端口判断网络和主节点的mysqld服务是否正常。
6.libaio,openssl也可以考虑安装
以上就是PXC搭建问题有哪些，小编相信有部分知识点可能是我们日常工作会见到或用到的。希望你能通过这篇文章学到更多知识。更多详情敬请关注创新互联行业资讯频道。
当前名称：PXC搭建问题有哪些
文章位置：http://6mz.cn/article/pgcpdp.html