cgroup怎么使用
本篇内容主要讲解“cgroup怎么使用”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“cgroup怎么使用”吧!
成都创新互联专注于嘉黎企业网站建设,响应式网站设计,商城网站建设。嘉黎网站建设公司,为嘉黎等地区提供建站服务。全流程定制开发，专业设计，全程项目跟踪，成都创新互联专业和态度为您提供的服务
runC项目中，与cgroups相关的代码，都在目录 runc/libcontainer/cgroups/下
我们关注的主要内容在apply_raw.go和各个cgroups子系统的操作方法实现定义文件，如上图中红色字体部分显示的文件。 apply_raw.go主要是实现了cgroups.go中定义的一系列接口：
type Manager interface {
// Applies cgroup configuration to the process with the specified pid
Apply(pid int) error
// Returns the PIDs inside the cgroup set
GetPids() ([]int, error)
// Returns the PIDs inside the cgroup set & all sub-cgroups
GetAllPids() ([]int, error)
// Returns statistics for the cgroup set
GetStats() (*Stats, error)
// Toggles the freezer cgroup according with specified state
Freeze(state configs.FreezerState) error
// Destroys the cgroup set
Destroy() error
// NewCgroupManager() and LoadCgroupManager() require following attributes:
// Paths map[string]string
// Cgroups *cgroups.Cgroup
// Paths maps cgroup subsystem to path at which it is mounted.
// Cgroups specifies specific cgroup settings for the various subsystems
// Returns cgroup paths to save in a state file and to be able to
// restore the object later.
GetPaths() map[string]string
// Sets the cgroup as configured.
Set(container *configs.Config) error
}apply_raw.go中对上面定义的Manager中的8个接口逐一实现：
type Manager struct {
mu sync.Mutex
Cgroups *configs.Cgroup
Paths map[string]string
}
func (m *Manager) Apply(pid int) (err error) {
if m.Cgroups == nil {
return nil
}
m.mu.Lock()
defer m.mu.Unlock()
var c = m.Cgroups
d, err := getCgroupData(m.Cgroups, pid)
if err != nil {
return err
}
if c.Paths != nil {
paths := make(map[string]string)
for name, path := range c.Paths {
_, err := d.path(name)
if err != nil {
if cgroups.IsNotFound(err) {
continue
}
return err
}
paths[name] = path
}
m.Paths = paths
return cgroups.EnterPid(m.Paths, pid)
}
paths := make(map[string]string)
for _, sys := range subsystems {
if err := sys.Apply(d); err != nil {
return err
}
// TODO: Apply should, ideally, be reentrant or be broken up into a separate
// create and join phase so that the cgroup hierarchy for a container can be
// created then join consists of writing the process pids to cgroup.procs
p, err := d.path(sys.Name())
if err != nil {
// The non-presence of the devices subsystem is
// considered fatal for security reasons.
if cgroups.IsNotFound(err) && sys.Name() != "devices" {
continue
}
return err
}
paths[sys.Name()] = p
}
m.Paths = paths
return nil
}
func (m *Manager) Destroy() error {
if m.Cgroups.Paths != nil {
return nil
}
m.mu.Lock()
defer m.mu.Unlock()
if err := cgroups.RemovePaths(m.Paths); err != nil {
return err
}
m.Paths = make(map[string]string)
return nil
}
func (m *Manager) GetPaths() map[string]string {
m.mu.Lock()
paths := m.Paths
m.mu.Unlock()
return paths
}
func (m *Manager) GetStats() (*cgroups.Stats, error) {
m.mu.Lock()
defer m.mu.Unlock()
stats := cgroups.NewStats()
for name, path := range m.Paths {
sys, err := subsystems.Get(name)
if err == errSubsystemDoesNotExist || !cgroups.PathExists(path) {
continue
}
if err := sys.GetStats(path, stats); err != nil {
return nil, err
}
}
return stats, nil
}
func (m *Manager) Set(container *configs.Config) error {
// If Paths are set, then we are just joining cgroups paths
// and there is no need to set any values.
if m.Cgroups.Paths != nil {
return nil
}
paths := m.GetPaths()
for _, sys := range subsystems {
path := paths[sys.Name()]
if err := sys.Set(path, container.Cgroups); err != nil {
return err
}
}
if m.Paths["cpu"] != "" {
if err := CheckCpushares(m.Paths["cpu"], container.Cgroups.Resources.CpuShares); err != nil {
return err
}
}
return nil
}
// Freeze toggles the container's freezer cgroup depending on the state
// provided
func (m *Manager) Freeze(state configs.FreezerState) error {
paths := m.GetPaths()
dir := paths["freezer"]
prevState := m.Cgroups.Resources.Freezer
m.Cgroups.Resources.Freezer = state
freezer, err := subsystems.Get("freezer")
if err != nil {
return err
}
err = freezer.Set(dir, m.Cgroups)
if err != nil {
m.Cgroups.Resources.Freezer = prevState
return err
}
return nil
}
func (m *Manager) GetPids() ([]int, error) {
paths := m.GetPaths()
return cgroups.GetPids(paths["devices"])
}
func (m *Manager) GetAllPids() ([]int, error) {
paths := m.GetPaths()
return cgroups.GetAllPids(paths["devices"])
}再以cpu subsystem为例，看看各subsystem具体的操作方法定义：
type CpuGroup struct {
}
func (s *CpuGroup) Name() string {
return "cpu"
}
// 将cgroup配置和对应的pid更新到cpu subsystem
func (s *CpuGroup) Apply(d *cgroupData) error {
// We always want to join the cpu group, to allow fair cpu scheduling
// on a container basis
path, err := d.path("cpu")
if err != nil && !cgroups.IsNotFound(err) {
return err
}
return s.ApplyDir(path, d.config, d.pid)
}
func (s *CpuGroup) ApplyDir(path string, cgroup *configs.Cgroup, pid int) error {
// This might happen if we have no cpu cgroup mounted.
// Just do nothing and don't fail.
if path == "" {
return nil
}
if err := os.MkdirAll(path, 0755); err != nil {
return err
}
// We should set the real-Time group scheduling settings before moving
// in the process because if the process is already in SCHED_RR mode
// and no RT bandwidth is set, adding it will fail.
if err := s.SetRtSched(path, cgroup); err != nil {
return err
}
// because we are not using d.join we need to place the pid into the procs file
// unlike the other subsystems
if err := cgroups.WriteCgroupProc(path, pid); err != nil {
return err
}
return nil
}
func (s *CpuGroup) SetRtSched(path string, cgroup *configs.Cgroup) error {
if cgroup.Resources.CpuRtPeriod != 0 {
if err := writeFile(path, "cpu.rt_period_us", strconv.FormatInt(cgroup.Resources.CpuRtPeriod, 10)); err != nil {
return err
}
}
if cgroup.Resources.CpuRtRuntime != 0 {
if err := writeFile(path, "cpu.rt_runtime_us", strconv.FormatInt(cgroup.Resources.CpuRtRuntime, 10)); err != nil {
return err
}
}
return nil
}
func (s *CpuGroup) Set(path string, cgroup *configs.Cgroup) error {
if cgroup.Resources.CpuShares != 0 {
if err := writeFile(path, "cpu.shares", strconv.FormatInt(cgroup.Resources.CpuShares, 10)); err != nil {
return err
}
}
if cgroup.Resources.CpuPeriod != 0 {
if err := writeFile(path, "cpu.cfs_period_us", strconv.FormatInt(cgroup.Resources.CpuPeriod, 10)); err != nil {
return err
}
}
if cgroup.Resources.CpuQuota != 0 {
if err := writeFile(path, "cpu.cfs_quota_us", strconv.FormatInt(cgroup.Resources.CpuQuota, 10)); err != nil {
return err
}
}
if err := s.SetRtSched(path, cgroup); err != nil {
return err
}
return nil
}
func (s *CpuGroup) Remove(d *cgroupData) error {
return removePath(d.path("cpu"))
}
func (s *CpuGroup) GetStats(path string, stats *cgroups.Stats) error {
f, err := os.Open(filepath.Join(path, "cpu.stat"))
if err != nil {
if os.IsNotExist(err) {
return nil
}
return err
}
defer f.Close()
sc := bufio.NewScanner(f)
for sc.Scan() {
t, v, err := getCgroupParamKeyValue(sc.Text())
if err != nil {
return err
}
switch t {
case "nr_periods":
stats.CpuStats.ThrottlingData.Periods = v
case "nr_throttled":
stats.CpuStats.ThrottlingData.ThrottledPeriods = v
case "throttled_time":
stats.CpuStats.ThrottlingData.ThrottledTime = v
}
}
return nil
}查看某个runC启动的容器state.json文件，能看到该容器对应的cgroup和namespace 路径信息： $ cat /var/run/runc/$containerName/state.json | jq .
"namespace_paths": {
"NEWUTS": "/proc/30097/ns/uts",
"NEWUSER": "/proc/30097/ns/user",
"NEWPID": "/proc/30097/ns/pid",
"NEWNS": "/proc/30097/ns/mnt",
"NEWNET": "/proc/30097/ns/net",
"NEWIPC": "/proc/30097/ns/ipc"
},
"cgroup_paths": {
"perf_event": "/sys/fs/cgroup/perf_event/user.slice/container1",
"net_cls": "/sys/fs/cgroup/net_cls/user.slice/container1",
"name=systemd": "/sys/fs/cgroup/systemd/user.slice/container1",
"blkio": "/sys/fs/cgroup/blkio/user.slice/container1",
"cpu": "/sys/fs/cgroup/cpu,cpuacct/user.slice/container1",
"cpuacct": "/sys/fs/cgroup/cpu,cpuacct/user.slice/container1",
"cpuset": "/sys/fs/cgroup/cpuset/user.slice/container1",
"devices": "/sys/fs/cgroup/devices/user.slice/container1",
"freezer": "/sys/fs/cgroup/freezer/user.slice/container1",
"hugetlb": "/sys/fs/cgroup/hugetlb/user.slice/container1",
"memory": "/sys/fs/cgroup/memory/user.slice/container1"
},到此，相信大家对“cgroup怎么使用”有了更深的了解，不妨来实际操作一番吧！这里是创新互联网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！
网站名称：cgroup怎么使用
文章分享：http://6mz.cn/article/jgiidi.html