近期一些典型的Case
招行问题分析及建议
网站的建设创新互联公司专注网站定制,经验丰富,不做模板,主营网站定制开发.小程序定制开发,H5页面制作!给你焕然一新的设计体验!已为岗亭等企业提供专业服务。
针对近期工作中出现的问题，我选取了一些典型案例并加上自己的分析。
1. ftpdbn1-deadlock问题：
通过打开event monitor抓取的数据，发现是由一个存储过程大量执行同一个表的delete语句导致的死锁。存储过程定义如下：
CREATEPROCEDURE CIFDBO.SP_FRM_E_FMEVRFCA_LOG_ADD_V1 (
IN pMDL_INS_COD CIFDBO.MDL_INS_COD_ARRAY,
......
IN pREC_CNT CIFDBO.INT_ARRAY,
OUT pRtCode INTEGER
)
SPECIFIC SP_FRM_E_FMEVRFCA_LOG_ADD_V1
P1:BEGIN
DECLARE vEVT_ID CHAR(20);
DECLARE i, n INTEGER;
DECLARE vTimestamp TIMESTAMP;
DECLARE vDateDelete TIMESTAMP;
DECLARE SQLCODE INTEGER;
DECLAREEXIT HANDLERFOR SQLEXCEPTION
BEGIN
SET pRtCode= SQLCODE;
END;
SET pRtCode=-1;
SET vTimestamp=CURRENT TIMESTAMP;
SET vDateDelete= vTimestamp-3 MONTHS;
DELETEFROM FRM.FMEVRFCA_LOGWHERE CRT_TIM< vDateDelete;
SET n= CARDINALITY(pTBL_NAM);
SET i=1;
WHILE (i<= n) DO
INSERTINTO FRM.FMEVRFCA_LOG
(
MDL_INS_COD ,
SEQ_NO ,
TBL_NAM ,
OPR_COD ,
UPD_TIM ,
REM_KEY ,
REC_CNT ,
CRT_TIM
)
VALUES
(
pMDL_INS_COD[i],
pSEQ_NO[i] ,
pTBL_NAM[i] ,
pOPR_COD[i] ,
pUPD_TIM[i] ,
pREM_KEY[i] ,
pREC_CNT[i] ,
vTimestamp
);
SET i= i+1;
END WHILE;
SET pRtCode=0;
END P1
优化建议： 为避免将delete语句移出存储过程，由一个单独的task定期执行！
2. osfdb01-ORSDB锁升级
造成锁升级的SQL语句（锁升级发生在表OWK.EMP_STAFF_ORG上）：
SELECT tsk.RSP_TSK_CODE, tsk.PRJ_PUB_CODE, tsk.RSP_PRJ_CODE, prj.RSP_PRJ_NAME, tsk.RSM_ID, tsk.RSM_NAME, tsk.RSM_ORG, prj.RSP_FREQ, pub.BRANCH_ID,pub.BRANCH_NAME, tsk.CHK_OBJ, tsk.ATT_NAME, tsk.CHK_DATE, tsk.PLM_RSV, tsk.REMARK, tsk.DUE_DATE, tsk.UPDATE_USER, (case when (tsk.RSP_TSK_STATUS='FINISHED'or tsk.RSP_TSK_STATUS='ODFINISHED') then tsk.UPDATE_TIMEelsenullend)as UPDATE_TIME, tsk.RSP_TSK_STATUS
FROM OBS.RSP_TASK tsk leftjoin OBS.RSP_PRJ_PUB pubon tsk.PRJ_PUB_CODE= pub.PRJ_PUB_CODE leftjoin OBS.RSP_PRJ prjon tsk.RSP_PRJ_CODE= prj.RSP_PRJ_CODE
WHERE 1=1AND tsk.RSM_IDIN (
select sta_idfrom OWK.EMP_STAFFwhere sta_id='157495'union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106075%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106110%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/112405%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/116955%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106085%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists (select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106095%') )
AND tsk.DUE_DATE>='2017-07-01'
AND tsk.DUE_DATE<='2017-07-31'
ORDERBYYEAR(tsk.CREATE_TIME)DESC, pub.BRANCH_IDDESC
抓出关于表OWK.EMP_STAFF_ORG部分的SQL
select sta_idfrom OWK.EMP_STAFFwhere sta_id='157495'union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106075%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106110%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/112405%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/116955%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106085%')union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand org.PTHlike'100001/105990/106095%')
用db2expln得到它的执行计划：
Optimizer Plan:
Rows
Operator
(ID)
Cost
6.79546
RETURN
( 1)
6214.79
|
6.79546
TBSCAN
( 2)
6214.79
|
6.79546
SORT
( 3)
6214.79
|
41.2667
UNION
( 4)
6214.77
+-----------------------+------------------------+-----------------+-----+-----------------------+---------------+-------------------+
6.79546 6.28938 6.79546 6.79546 6.79546 1 6.79546
HSJOIN HSJOIN HSJOIN HSJOIN HSJOIN IXSCAN HSJOIN
( 5) ( 8) (11) (14) (17) (20) (21)
1034.53 1034.53 1034.53 1034.53 1034.53 7.58089 1034.53
/ \ / \ / \ / \ / \ | / \
102296 1.08021 102296 0.999762 102296 1.08021 102296 1.08021 102296 1.08021 101993 102296 1.08021
TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN TBSCAN Index: TBSCAN TBSCAN
( 6) ( 7) ( 9) (10) (12) (13) (15) (16) (18) (19) OWK (22) (23)
293.6 735.957 293.6 735.957 293.6 735.957 293.6 735.957 293.6 735.957 P_STAFF_ID 293.6 735.957
| | | | | | | | | | | |
102296 16261 102296 16261 102296 16261 102296 16261 102296 16261 102296 16261
Table: Table: Table: Table: Table: Table: Table: Table: Table: Table: Table: Table:
OWK OWK OWK OWK OWK OWK OWK OWK OWK OWK OWK OWK
EMP_STAFF_ORG EMP_ORG EMP_STAFF_ORG EMP_ORG EMP_STAFF_ORG EMP_ORG EMP_STAFF_ORG EMP_ORG EMP_STAFF_ORG EMP_ORG EMP_STAFF_ORG EMP_ORG
Estimated Cost = 6214.787109
将SQL改编如下：
select sta_idfrom OWK.EMP_STAFFwhere sta_id='157495'union
select sta.sta_idfrom OWK.EMP_STAFF_ORG stawhere sta.MFLAG=1andexists
(select1from OWK.EMP_ORG orgwhere sta.ORG_CODE= org.ORG_CODEand
substr(org.PTH,1,20)in ('100001/105990/106075','100001/105990/106110','100001/105990/112405','100001/105990/116955','100001/105990/106085','100001/105990/106095'))
用db2expln得到新SQL的执行计划：
Optimizer Plan:
Rows
Operator
(ID)
Cost
40.2545
RETURN
( 1)
1041.11
|
40.2545
TBSCAN
( 2)
1041.11
|
40.2545
SORT
( 3)
1041.11
|
41.2545
UNION
( 4)
1041.09
/ \
40.2545 1
HSJOIN IXSCAN
( 5) ( 8)
1033.51 7.58089
/ \ |
102296 6.39886 101993
TBSCAN TBSCAN Index:
( 6) ( 7) OWK
293.6 734.935 P_STAFF_ID
| |
102296 16261
Table: Table:
OWK OWK
EMP_STAFF_ORG EMP_ORG
Estimated Cardinality = 40.254482
简单改写后，返回的结果集不变，但效率提高了很多。可见SQL语句
3. didisrvdb02-逻辑读高问题：
逻辑读高的SQL：
update (select TRN_STATUS,REAL_SERIAL
from DPAY.TAB_OUSYS_INFO1
where TRN_STATUS=:L0and CUST_ACCNO=:L1and REAL_SERIAL=:L2and ID>=:L3and ID<=:L4
orderby idascfetch first5000 rowsonly)
set TRN_STATUS=:L5 ,REAL_SERIAL=:L6
查看表 DPAY.TAB_OUSYS_INFO1上的索引：
索引名 索引包含的列
SQL160106192202630 +MERCH_DATE+MERCH_SERIAL
OUSYS1_INDEX_1 +ID+TRN_BATCH
OUSYS1_INDEX_2 +TRN_STATUS+CUST_ACCNO+REAL_SERIAL+SEND_FLAG
OUSYS1_INDEX_3 +TRN_STATUS+MERCH_DATE+ID
OUSYS1_INDEX_4 +ID
表的行数及索引的键值情况如下：
db2 "select count(1) from DPAY.TAB_OUSYS_INFO1"
2685595
db2 "select count(distinct SEND_FLAG) from DPAY.TAB_OUSYS_INFO1"
1
db2 "select count(distinct TRN_STATUS) from DPAY.TAB_OUSYS_INFO1"
4
db2 "select count(distinct CUST_ACCNO) from DPAY.TAB_OUSYS_INFO1"
1
db2 "select count(distinct REAL_SERIAL) from DPAY.TAB_OUSYS_INFO1"
1247
db2 "select count(distinct ID) from DPAY.TAB_OUSYS_INFO1"
2685074
db2 "select count(distinct MERCH_DATE) from DPAY.TAB_OUSYS_INFO1"
6
db2 "select count(distinct MERCH_SERIAL) from DPAY.TAB_OUSYS_INFO1"
2685339
从以上的数据可以看出，此表上的索引建立的很不合理。根据索引建立原则，我们应该选择强键值列作为索引列，而且越强的越要越放在前面，所以此表上的索引应该做如下优化：
l 对索引SQL160106192202630进行改造，使索引包含的列为+MERCH_SERIAL或+MERCH_SERIAL+MERCH_DATE，这样根据MERCH_SERIAL检索时也可以用到此索引。
l 索引OUSYS1_INDEX_1可以保留，但意义不大，因为ID已经是强键值列。
l 对索引OUSYS1_INDEX_2进行改造，只保留REAL_SERIAL列，至少也应该将REAL_SERIAL列放在最前面。
l 索引OUSYS1_INDEX_3可以删除，至少也应该将ID列放在最前面。
l 保留OUSYS1_INDEX_4索引。
数据库活动时间为2016-01-06-20.19.41：
db2 "SELECT SUBSTR(DB_NAME, 1, 20) AS DB_NAME, DB_STATUS, SERVER_PLATFORM, DB_LOCATION, DB_CONN_TIME FROM SYSIBMADM.SNAPDB"
DB_NAME DB_STATUS SERVER_PLATFORM DB_LOCATION DB_CONN_TIME
-------------------------------------------------------------------------------------------------------------------------------- ---------------- --------------- ------------ --------------------------
DIDIPRI ACTIVE AIX64 LOCAL 2016-01-06-20.19.41.644178
检查数据库的索引使用情况：
db2 "SELECT VARCHAR(S.INDSCHEMA, 20) AS INDSCHEMA,VARCHAR(S.INDNAME, 20) AS INDNAME,T.DATA_PARTITION_ID, T.MEMBER,T.INDEX_SCANS,T.INDEX_ONLY_SCANS FROM TABLE(MON_GET_INDEX(null,null, -2)) as T, SYSCAT.INDEXES AS S WHERE T.TABSCHEMA = S.TABSCHEMA AND T.TABNAME = S.TABNAME AND T.IID = S.IID and S.INDSCHEMA not like 'SYS%' ORDER BY INDEX_SCANS DESC"|more
数据库中非系统索引共336个：
db2 "SELECT count(*) FROM TABLE(MON_GET_INDEX(null,null, -2)) as T, SYSCAT.INDEXES AS S WHERE T.TABSCHEMA = S.TABSCHEMA AND T.TABNAME = S.TABNAME AND T.IID = S.IID and S.INDSCHEMA not like 'SYS%'"
336
有99个索引自数据库激活以来从未使用：
db2 "SELECT count(*) FROM TABLE(MON_GET_INDEX(null,null, -2)) as T, SYSCAT.INDEXES AS S WHERE T.TABSCHEMA = S.TABSCHEMA AND T.TABNAME = S.TABNAME AND T.IID = S.IID and S.INDSCHEMA not like 'SYS%' and T.INDEX_SCANS=0"
99
4. 问题分析及建议：
根据以上的问题分析，应用方面存在如下几个问题：
l 只考虑功能的实现，对是否会造成锁竞争，SQL语句执行效率是否底下考虑不足。
l 数据库存在大量的无效索引和不合理的索引。
几点建议如下：
l 在数据库报告中增加“从未使用的索引”项，并考虑删除以节省空间和提高效率。
l 对开发人员进行锁机制，SQL优化，建立高效索引方面的培训，以从源头解决问题，减少运维压力。
分享名称：近期一些典型的Case
网站地址：http://6mz.cn/article/ipepje.html