adrduino中怎么利用wido实现联网

本篇文章为大家展示了adrduino中怎么利用wido实现联网，内容简明扼要并且容易理解，绝对能使你眼前一亮，通过这篇文章的详细介绍希望你能有所收获。

10年积累的网站设计制作、成都网站制作经验，可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你，你也不认识我。但先网站设计后付款的网站建设流程，更有五华免费网站建设让你可以放心的选择与我们合作。

#include
#include
#include
#include
#include "utility/debug.h"

#define WiDo_IRQ   7
#define WiDo_VBAT  5
#define WiDo_CS    10
Adafruit_CC3000 WiDo = Adafruit_CC3000(WiDo_CS, WiDo_IRQ, WiDo_VBAT,
                                         SPI_CLOCK_DIVIDER); // you can change this clock speed

#define WLAN_SSID       "Tenda_XXXXX"           // cannot be longer than 32 characters!
#define WLAN_PASS       "12345678"

// Security can be WLAN_SEC_UNSEC, WLAN_SEC_WEP, WLAN_SEC_WPA or WLAN_SEC_WPA2
#define WLAN_SECURITY   WLAN_SEC_WPA2
#define TIMEOUT_MS  2000

void setup(){
  
  Serial.begin(115200);
  /* Initialise the module */
  Serial.println(F("\nInitialising the CC3000 ..."));
  if (!WiDo.begin())
  {
    Serial.println(F("Unable to initialise the CC3000! Check your wiring?"));
    while(1);
  }
    
  /* NOTE: Secure connections are not available in 'Tiny' mode!
     By default connectToAP will retry indefinitely, however you can pass an
     optional maximum number of retries (greater than zero) as the fourth parameter.
  */
  
  Serial.println(F("Connecting Router/AP"));
  if (!WiDo.connectToAP(WLAN_SSID, WLAN_PASS, WLAN_SECURITY)) {
    Serial.println(F("Failed!"));
    while(1);
  }
  
  Serial.println(F("Router/AP Connected!"));
  
  /* Wait for DHCP to complete */
  Serial.println(F("Request DHCP"));
  while (!WiDo.checkDHCP())
  {
    delay(100); // ToDo: Insert a DHCP timeout!
  }  
}

void loop(){
  
  static Adafruit_CC3000_Client tcpClient;
  static unsigned long heartRate = millis();
  
  if(!tcpClient.connected()){
    Serial.println("Try to connect the Local Server");
    tcpClient.close();
    
    /* Set the target ip address and connection port */
    uint32_t ip = WiDo.IP2U32(192,168,0,12);
    tcpClient = WiDo.connectTCP(ip, 8080);
    
    if(!tcpClient.connected()){
      Serial.println(F("Couldn't connect to server! Make sure TCP Test Tool is running on the server."));
      while(1);
    }
  }
  else if(millis() - heartRate > 1000){
    heartRate = millis();  // Update time stamp of the microcontroller system
    
    char clientString[30];
    sprintf(clientString, "%s%d%s", "Wido heartRate: ",heartRate/1000," s\r\n");
    
    Serial.println(clientString);
    tcpClient.fastrprintln(clientString);

  }
  
  /* Read data until either the connection is closed, or the timeout is reached. */ 
  unsigned long lastRead = millis();
  while (tcpClient.connected() && (millis() - lastRead < TIMEOUT_MS)) {
    while (tcpClient.available()) {
      char c = tcpClient.read();
      Serial.print(c);
      lastRead = millis();
      
      // Disable sending message for a moment
      heartRate = millis();
    }
  }
}
 

上述内容就是adrduino中怎么利用wido实现联网，你们学到知识或技能了吗？如果还想学到更多技能或者丰富自己的知识储备，欢迎关注创新互联行业资讯频道。

本文题目：adrduino中怎么利用wido实现联网
转载源于：http://6mz.cn/article/ijjppp.html